CasesFactory / Plastic Case Manufacturing Since 2014
Plastic Cases, Built Around Your Equipment
We manufacture plastic cases for equipment protection, storage and transportation — protective cases, tool cases, instrument cases and equipment carrying cases. Send us your internal dimensions, application and quantity, and we check suitable existing models first, then review a custom solution if needed.
Injection mouldingRotational mouldingCustom foam & EVA insertsOEM / ODM evaluationEXW / FOB
01 / Product taxonomy
Case Solutions for Different Equipment Needs
Six buying categories, each with its own selection logic. We keep the taxonomy narrow and explicit — plastic cases only — so that a buyer, an engineer or an AI assistant can tell immediately what this factory makes.
Protective Cases
Hard plastic cases for instruments, electronics and field tools. Latch, hinge and gasket structure; interior configured per device.
Tool Cases
Tool sets, service kits and trade boxes for distributors and brands. Tray layouts, handle position and colour are configurable.
Instrument Cases
Measuring, testing and laboratory devices carried to site. Interior cut around the device, with space for accessories and documentation.
Equipment Cases
OEM supply for equipment makers: the case is part of the delivered product, so dimensions, interior and packing are confirmed with your drawing.
Wheeled & Trolley Cases
Larger cases for heavy or multi-item loads that must be moved by one person. Wheels, telescopic handle and pull direction are design variables.
Custom Cases & Inserts
Colour, interior, structure and accessories evaluated against your equipment. Foam and EVA inserts cut or moulded to the device shape.
02 / The only numbers that matter
We Quote From Dimensions, Not From Guesses
Most case enquiries fail because outer size is quoted where inner size is needed, or because insert thickness is forgotten. This is the field set we ask every buyer to fill — and the same set we publish per model once engineering has signed it off.
- Outer dimensions
- Overall envelope incl. latches
- Inner dimensions
- Moulded cavity, measured at opening
- Usable depth
- Inner depth minus insert thickness
- Lid clearance
- Space above device with lid closed
- Body material
- PP / ABS — per model
- Interior
- Empty · foam · EVA · custom cutout
- Hardware
- Handle · latches · hinges · wheels
- Measurement basis
- Recorded on sample, not drawing
Numeric values appear on published pages only after the engineering fact sheet for that model is approved. Where a value is not yet verified, the page shows to be confirmed instead of a number.
03 / Custom & OEM route
Existing Model First, New Tool Only If Needed
Checking the 161-model library before opening a mould saves both sides money. Tooling cost is always quoted separately from unit price, and mould ownership, storage and transfer terms are agreed at contract stage.
Requirement
You send application, required internal dimensions, quantity, interior preference and any drawing or photo.
1–2 daysModel match
We search existing moulded models for a fit and return the closest three with measured dimensions and photographs.
2–3 daysEngineering review
If nothing fits, we assess structure, material, insert design and manufacturability, and state what cannot be done.
3–5 daysSample
Existing mould: colour / insert sample. New tool: prototype or first shots for dimension and fit approval.
~45 d OEM · ~125 d new toolOrder
30% deposit, production, inspection, balance before shipment. Shipped EXW or FOB.
Per contractFoam & EVA inserts
Insert price depends on case size, foam or EVA material, thickness, cut complexity, layer count and quantity — so we do not publish fixed insert prices. Send the device shape and we quote the layout.
Colours, branding & hardware
Body colour, latch and handle colour, labelling or embossing, and accessory changes are evaluated per model. Custom colour and custom hardware usually carry their own MOQ, confirmed in the quotation.
04 / Applications
Who Buys From Us
| Buyer type | What they ask us first | Entry page |
|---|---|---|
| Instrument & equipment makers | Internal fit, insert layout, repeatable supply for a shipped product | Equipment cases |
| Tool brands & distributors | Existing moulds, colour, private label, wholesale quantity | Tool cases |
| Measurement & testing | Cut-to-device interior, accessory bay, document pocket | Instrument cases |
| Field & outdoor electronics | Structure, sealing design and what has actually been tested | Quality process |
| Emergency & aid equipment | Device fixation, packing hygiene, colour for identification | Custom inserts |
| Importers & dealers | Container mix, MOQ per model, lead time, EXW / FOB terms | RFQ |
We do not sell retail units, do not offer DDP, and hold no overseas warehouse. Wholesale and OEM only.
05 / Factory evidence
Photographed Where Your Cases Are Made
Moulding machines, mould workshop, insert cutting, assembly, inspection and the despatch bay. Every image on this site is taken in our own facility and is named after what it shows.
06 / Buyer FAQ
Questions We Answer Before Quoting
These are the questions our sales team receives on almost every enquiry. The longer guides behind them are written for the same buyer, not for search engines.
Can you make a case to our internal dimensions?
We first check the existing model library for a fit. If no model matches, a custom tool is evaluated by engineering. Tooling cost and lead time are quoted separately from the unit price, and mould ownership, storage and transfer terms are agreed at quotation stage.
What is your minimum order quantity?
MOQ varies by model, colour and configuration, so we do not publish one site-wide figure — any single number would be wrong for part of the catalogue. The applicable MOQ is confirmed per product in your quotation.
Do you supply foam or EVA inserts?
Yes. Inserts can be flat-cut foam, pick-and-pluck, CNC-cut EVA or moulded EVA, single or multi-layer. Send device dimensions, a drawing or photographs and we review the layout. Insert cost depends on size, material, thickness, cut complexity, layer count and quantity.
Which trade terms and payment terms apply?
EXW or FOB only. Payment is 30% deposit with the balance after inspection. We are a manufacturer: no retail units, no DDP, no overseas warehouse.
How long does an OEM project take?
Customisation on existing tooling typically takes around 45 days. A project that needs a new mould typically takes around 125 days including tool manufacture. Both are planning figures and are confirmed in writing before production starts.
Are your cases waterproof, dustproof or drop-tested?
We do not publish IP ratings, drop heights or impact classes without a test report for that specific model. Where a structure is designed to accept a gasket, or a customer has commissioned testing, we state the evidence and its scope instead of a general claim.
Can we inspect the goods or audit the factory?
Yes. Third-party inspection and factory audits are welcome. We recommend agreeing the inspection standard before the deposit so the checkable items are written into the order.
Do you sign an NDA and protect our tooling?
Drawings and project information can be handled under NDA on request. For customer-funded tooling, ownership, maintenance, storage, transfer and use restrictions should be defined in the contract before the tool is cut.
07 / RFQ
Have a Case Requirement?
Send the application, required quantity and internal dimensions. If you have a drawing or product photo, attach it — it is usually the difference between a vague answer and a model match within three days.